 |
 |
 |
|
Fall arrest and work positioning harness
Available in Size 2, the Petzl Volt Full-Body Harness with Oxan Triact-Lock Carabiner in stock at OmniProGear is easy to use and has a ladder climb attachment point for ventral attachment of the fall-arrest trolley/grab, to ensure comfort during progression. Built with an Easyfit design, the harness will keep its shape and is easy to put on with both feet on the ground with automatic buckles on the waist belt and leg loops. Your work is hard, but wearing a harness all day shouldn't make it even harder. The Petzl Volt Full-Body Harness is lightweight and offers outstanding support with a wide, semi-rigid waist belt. Model c72afa2c has side attachment points for affixing a positioning lanyard for use in double mode, and sternal and dorsal attachment points for attaching a fall arrest system.
Description
- Rapid donning thanks to the EASYFIT design:
- vest ensures the harness keeps its shape
-
FAST automatic buckles on the waistbelt and leg loops allow the harness
to be very easily donned, with both feet on the ground. These buckles
retain their adjustment settings between donnings.
- Comfortable throughout the work day :
- anatomical design is close-fitting, while giving optimal freedom of movement
- lightweight, breathable construction
- wide, semi-rigid waistbelt for excellent support
-
for vertical progression with a rail or cable-based fall protection
system, the LADDER CLIMB attachment point allows for ventral attachment
of the fall-arrest trolley: it distributes the load on the waistbelt and
thus ensures optimal comfort during progression. In case of a fall,
this attachment point automatically moves upward to a sternal position
to ensure a vertical post-fall body position.
- leg loop foam position can be adjusted for perfect positioning
- side slots allow a seat to be installed for greater comfort in prolonged suspension
- Easy to use:
- waistbelt and shoulder straps equipped with self-locking DoubleBack buckles for quick and easy adjustment
- side attachment points can be folded down to prevent them snagging accidentally when not in use
-
stowage system for the MGO connectors on fall arrest lanyards, on each
shoulder strap. In case of a fall, this system releases the MGO
connectors and allows the absorber to be deployed.
- fall indicators
on the sternal and dorsal attachment points. If a fall indicator is
visible after a fall, the harness must be retired.
- equipment loops, slots for CARITOOL tool holder and TOOLBAG tool pouch allow easy organization of work tools
Specifications
-
LADDER CLIMB
attachment point: for attaching the trolley of a rail or cable-based
fall protection system
-
Side attachment
points: for attaching a positioning lanyard for use in double mode
-
Sternal attachment point: for attaching a fall arrest system
-
Dorsal attachment point: for attaching a fall arrest system
-
Rear waistbelt attachment point: for attaching a restraint lanyard
-
Certification(s): CE EN 361, CE EN 358, EAC, CSA (NO ANSI)
-
Material(s): nylon, polyester, aluminum, steel
(Measure with CLOTHING ON [aka Coveralls/Jacket] NOT your clothing measurements)
C72AFA 2C
Size 2
Waist belt 83-120 cm (32.50" to 47.25")
Leg loops 50-65 cm (31.50" to 25.60")
Stature 175-200 cm (5 ft 9" to 6 ft 7")
Weight 2080 g
Guarantee
3 years
Packing
1
The stitching in the webbing of the LADDER CLIMB (Ventral)
attachment point strap is calibrated to begin tearing at 3 kN. So this
point is not designed for uses such as suspension and positioning. There
would be risk of accidental tearing of the stitching in the webbing of
the ventral point.
|
|
|
 |
|
 |
|
