Designed for use with Petzl's 10-millimeter Coeur Stainless Steel Hanger, these bolts help create an anchor that's ideal for exterior use. Petzl uses 316L high-quality stainless steel, which resists corrosion, so you know the anchor will last. It features large attachment holes, so you can install two thick carabiners in the same anchor if necessary. Petzl hangers are known for their thickness and sturdy construction. The rounded edges on the attachment holes help prevent wear and tear on the connectors. All of Petzl's hangers are textured on the back, and the grip is part of the anti-rotation system. When the back of the hanger comes in contact with the structure, the design helps prevent the hanger from turning during installation or when it is heavily side-loaded.
Petzl anchors (hangers and bolts) use different types of steel to adapt the anchor to the
environment in which it is used:
• 316L high quality stainless steel, designed for typical exterior uses.
Featuring a large attachment hole, Petzl
hangers facilitate clipping carabiners and
allow two carabiners to be installed, even
thick ones, in the same anchor.
Preventing connector wear
Petzl hangers are characterized by high
thickness, and rounded edges on the
attachment holes. This construction
minimizes wear on connectors,
regardless of their material composition.
Hanger anti-rotation system
Petzl hangers are textured on the back
side that is in contact with the structure
(concrete, rock...). This helps prevent the
hanger turning when the anchor is being
installed, or when it is heavily side-loaded