Edelrid KAA 4 or 5 to 1 Haul System 1.5 meterThe KAA is a prefabricated haul system for lifting persons in case of
rescue or for tensioning a system. Its a prefabricated haul system ( jigger) for rescue pick offs and/or tensioning systems 4:1 and 5:1 lifting ratios. In addition, as the KAA is certified
according to EN 354, it can be used for workplace stabilization, as a
restraint system (open/closed) and controlled lowering. Its strap-based
construction makes it the most compact and lightweight system on the
market. Depending on the positioning, it offers a 4:1 or 5:1 lifting
ratio with an efficiency of 91%. The KAA is compact but delivered ready
for immediate use, so that no valuable time is lost when it is required.
A swivel is provided at each end to prevent the system from twisting.
The hand lever on the draw cord allows a better pull and it can also be
used as a lowering lever.
- Prefabricated haul system used for workplace stabilization, tensioning and as a restraint system.
- Very compact and light due to a strap-based design
- Facilitates controlled lowering
- 4:1 or 5:1 lifting ratio
- Efficiency: 91%
- Integrated RFID-Chip
- Load capacity [Kn]: 22
- CE marking: yes EN 354
- country of origin: Germany
- Energy Absorber: No
- Swivel: Yes
Edelrid KAA 4 or 5 to 1 Haul System 1.5 With Controlled Release