A step forward in comfort for technical rope access workers. The structure and padding have been shaped for optimal ergonomics, especially on the neck and crotch. The harness was developed following the findings from our SOSPESI research
program which gave us new insights on suspension trauma.
connection between the waist belt and leg loops makes the GT comfortable both during suspension and on the ground. The padding
uses variable thicknesses and stiffness to provide the right amount of
support and comfort for every part of the body. Double height adjustment (front and back) allows the worker to perfectly fie-tune the fit.
Supplied with the ANSI Carabiner connector that features an anti-rotation system for a secure attachment.
Equipped with tension strap for securing a chest ascender in a streamlined way.
Aluminum alloy attachment rings. Four attachment points: 1 front, 1 back, 2 side.
Designed to be used in combination with the CAMP Goblin for fall arrest.
Size: 1 / Small to Large
Certifications: EN 361, ANSI
Goblin Fall Arrester
The Goblin fall-arrester represents a monumental step forward in safety
for workers who rely on fall arrest systems for work at heights. To be
used on semi-static ropes ranging from 10 to 11 mm. The innovative cam
also creates perfectly smooth action on the rope whether it is being
used to ascend or descend the line.
Performance can be further increased
by using the new patented Rope Surfer device. Wear and tear on the rope
is reduced to the minimum thanks to the specially designed locking
mechanism that lowers the fall arrest force (the force transferred to
the body in the event of a fall) by half compared to other devices and
locks the rope along a long axis, rather than pinching it aggressively
with a toothed cam.
Switching to the ascension mode is accomplished with the simple push of a
button on the back of the device.
Hot forged stainless steel locking components combined with a robust
aluminum alloy body for exceptional durability over time.
Certified for single use up to 120 kg and for double person rescue
scenarios up to 200 kg.
2015 UPDATE: patented Rope Surfer system allows the device to travel
downward with greater fluidity,
No Shock Pack Needed or Required
ANSI Z359.1 and EAC certified, EN 353-2
Rope Diameter: 10-11mm
150ft of 11mm Static UL ANSI Rope
A true static kernmantle rope providing dependability and durability in
the most demanding environments. Perfect for rope access, search and
rescue and rope access work.
Certified to UL Life Safety Rope
specifications, NFPA 1983:2012 Edition Standards and ANSI Standards for
Life Safety Static Rope with an internal ribbon through out the entire
Diameter:11.0mm (.433071") (Reference 7/16" = 11.1125mm)
Minimum Breaking Strength: 33.3kn (7500 lbs) (31.3kn / 7047lbs as reported by UL - With 3 Sigma Deviation)
2.2% at 1.35kn (300lbs)
4.4% at 2.7kn (600 lbs)
7.4% at 4.4kn (1000lbs)
Material: Polyester / Nylon Core
Weight per meter: 90 g/m (.064 lbs per foot)
Certification(s): NFPA 1983:2012 T Technical Use (static ropes),
ANSI Z359.1, Safety Requirements for Personal Fall Arrest Systems,
Subsystems and Components, 2007 Edition
Made in USA
OmniProGear has one of the best rope on the market. Check our spec's against everyone else.
We now have 11.0mm rope (not 11.5mm that others call 11mm or
7/16). This is very important as many devices are getting smaller, and
have a narrow range of rope sizes they will accept. Our goal is to make
sure that the rope stays close to 11mm as possible, when its under
tension, has absorbed water/humidity, and filled with dirt.
Don't let others fool you with high breaking strength that have
elongations as high as 10% even at 300lbs; Some call that static, semi
static or some other made up word, we call it a rubber band.
Its a real really pain to climbing and haul with a rubber band.
High elongation rope is designed for rock climbers the need it for fall arrest, not for rope access and rescue.
Optional UL certified end terminations.