Home > Rope & Cord >

FlatGrip Technora 900 Degree 19kN 8mm x 11 feet Prusik Cord with termination system
FlatGrip Technora 900 Degree 19kN 8mm x 11 feet Prusik Cord with termination system
OPG_R84TP


 
Our Price: $19.95

Product Code: OPG_R84TP
Qty:

Description
 
FlatGrip Prusik Cord Technora 900 Degree with Termination System available at OmniProGear is a kernmantle composite rope with a high abrasion resistant Technora cover. The grip strength is superior to a normal prusik, and it won't glaze over. The way the cord it built enables it to flatten out, resulting in more surface area and better gripping capability. Before you tie knots, you can cut and bond the sheath to the core with the termination system. Prusik knots will engage better even if they have not been neatly or properly tied. A rough length estimate for tandem prusik cords are 53 inches without knots and 65 inches without knots, which equals 118 inches--a little less than 11 feet. The prusik cord is rated is at more than 19kN (4315 lbs.) MBS, which almost doubles that of most prusik cords offered by competitors.

Our unique termination system (included) allows you to cut and bond the sheath to the core before you tie the knots. (Lighter or torch required - not included).

A rough length estimate for tandem prusik cords are 53 inches (without knots) and 65 inches ( without knots) which equals 118 inches, just shy of 11 feet. The 11 feet being sold in this package should be sufficient to create your own single or tandem prusik cords for most variations used. The correct length for each prusik cord is determined by the size of your pulley. Your small length prusik cord should nest up against the pulley with about 1/2" of space. The longer prusik should be about 5 inches from the bottom of the smaller one.

Material: Technora over polyester core
MBS: 19.17kN (4315 lbs)
Weight Per 100ft: 2.7lbs
Made in USA

Share your knowledge of this product. Be the first to write a review »