 |
 |
 |
|
ASAP LOCK
Mobile fall arrester with locking function
The
ASAP LOCK mobile fall arrester is designed to facilitate manipulations
during rope ascents. In normal use, the device moves freely along the
rope without any manual intervention and accompanies the user in all his
movements. In case of shock or sudden movement, the fall arrester locks
on the rope and stops the user. The ASAP LOCK's integrated locking
function allows the user to immobilize the device to reduce the length
of a fall. The connection arm makes the system loss-resistant when
passing intermediate anchors. The ASAP LOCK is used with an energy
absorbing lanyard to work at a distance from the rope. A shock pack must be used: Petzl L71AA20 - 20 cm ASAP'Sorber or PETZL L71AA40 - 40 cm ASAP'Sorber or Petzl L57 Absorbica absorber. Warning: You can NOT connect to an ASAP LOCK with a carabiner or rope.
Description
- Constant fall protection:
- arrests falls, slides, and uncontrolled descents
- works on vertical or angled rope
- locks on the rope even if grabbed during the fall
- Integrated locking function
allows the user to immobilize the device to reduce the length of a
fall. In case of a strong wind, this function also prevents the rope
from being blown upward.
- Simple to use, and effective:
- moves up or down the rope without any manual manipulation of the device
- easy to install and remove at any point on the rope
- connection arm makes the system loss-resistant when passing intermediate anchors
- is used with an ASAP’SORBER energy absorbing lanyard to work at a distance from the rope
Specifications
- Material(s): aluminum, stainless steel, nylon
- Certification(s): CE EN 353-2, CE EN 12841 type A, EAC
- Rope size: EN353-2 standard 11mm - EN12841-2 Standard 10-13mm EN 1891 type A
- Weight: 425 g
Petzl ASAP and ASAP Lock Devices
|
|
|
 |
|
 |
|
