Petzl SEQUOIA^®Arborist Harness

Comfortable tree care harness with good support

If you’re an arborist looking for a harness that strikes the perfect balance between comfort, support, and convenience — the SEQUOIA is for you. With comfortable 3D foam padding, the SEQUOIA also features wide and rigid waistbelt and leg loops for optimal support. FAST opening buckles make it quick and easy to don. With adjustable DOUBLEBACK buckles and anti-slip device, the setback is easy to adjust and stays in place. The wide front attachment points allow you to install an additional attachment bridge. They also allow a ZILLON or MICROFLIP work positioning lanyard to be connected. The waistbelt allows you to organize and carry all the necessary equipment for working in the canopy.

Detailed description

Optimal comfort and positioning:
- Wide and rigid waistbelt and leg loops offer optimal support throughout the workday
- Contact zones are sculpted and lined with breathable 3D foam padding to provide the comfort needed for working while suspended
- Setback can be adjusted for comfortable positioning using the adjustable DOUBLEBACK buckles
Convenient adjustment features:
- Waistbelt is equipped with a FAST opening buckle for quick and simple fastening and unfastening without loss of adjustment, even while wearing gloves
- Leg loops are equipped with triple action FAST opening buckles to limit the risk of accidental unfastening
- DOUBLEBACK buckles feature an anti-slip device to keep the adjustment in place
Accessories and ease of use:
- Wide front attachment points allow the user to install up to two attachment bridges, accessories directly on the bridge (RING, SWIVEL), and a ZILLON or MICROFLIP positioning lanyard
- Attachment bridge provides optimal lateral mobility
- Mobile side attachment points follow the orientation of the lanyard during movement
- Textile attachment points on the upper part of the waistbelt allow SEQUOIA shoulder straps, or other shoulder straps, to be connected for better support and load distribution
- Complete KNEE ASCENT kit can be installed on the waistbelt to increase efficiency when using SRS technique to ascend
- To transform the sit harness into a full-body harness, the TOP chest harness can be installed using the plastic buckle at the rear of the waistbelt and the RING M on the bridge
Easier to organize and carry equipment:
- Six pre-shaped equipment loops on the waistbelt
- Four CARITOOL tool holder slots on the waistbelt and two on each leg loop
- Textile connection point to connect chainsaw leash
- The FIRSTAID pouch can be connected via a specifically designed slot on the rear of the waistbelt; or another kit can be installed using the elastic band (included)
To improve comfort during prolonged suspension, a seat can be installed via shackles (not included) on the front D rings

Specifications

Attachment points: Attachment bridge, attachment points, side attachment points
Certification(s): CE EN 813, CE EN 358, allows the user to work in compliance with the ANSI Z133 standard, ASTM F887, CSA Z259.1, GB 6095: W standards
Material(s): Nylon, polyester, polyethylene, aluminum, steel

SKUs

SKUs	C069AB00	C069AB01	C069AB02
Size	0	1	2
Waist belt	65-80 cm	70-93 cm	83-120 cm
Leg loops	44-59 cm	47-62 cm	50-65 cm
Weight	1800 g	1860 g	2005 g
Guarantee	3 years	3 years